Cervix Gets Soft Before Ovu

finally ..

The cart is ready!
... Well almost. Yesterday until 1 o'clock in the garage tinkered, the harness has made us but then more problems than expected. But the engine is running, the light and now has the moped only lowered yet.
All right, now we have really had enough of screws and hope that joining any repairs and tinkering is done. I do not know how many times we were with Schmidt and Werner's bike service to get parts and screws .. Here again a big big thank you!
Meanwhile, the cylinder was in my s51 and was grinding out today re-installed, so enter the scooter also .. yay ..
as replacement scooter I have the Honda Dax taken by my father, the part is also fun.
Both mopeds now have the Heidenau K42 enduro tires on it, which are then we would prefer for the off-road routes, we would expect with certainty.
now are still about 6 days until we go there, alittle bit must be organized, but we should fix anything until Friday.



cylinder down and change tires


water cooking session with Henning, try gasoline stove


with an oscilloscope to the Samson, but looks so professional from


"Can voll geil ey are at the drive through"


Almost ready ..


So far, we have the daily log out, does well.

Notorious Shelly Martinez Watch

donations?

No Emergency Heat Goodman And Honeywell

It lights up!

Yesterday again until just before 0uhr been in the garage, screw and solder.
F + R Indicator, horn and parking lights work, the rest we can only test so when the engine is in it.
Could even then fit and the rear fender, because the powder coater was so fast parts (racks, foot rests, lamp shell) in the morning sat forward, at noon wars done, here again a thank you for this!
wait now that only the rim, otherwise we have it all.
Next week we will be in stock ready to and then go directly to the North Sea to retract the moped, and failure to notice before we're shifting about.

Henning and I are then from Thursday to Sunday at the Youth Video Award in Ludwigsburg, are nominated by a movie, so our fingers crossed, D




lit it!



tank and seat on it down for the photo ..



Note the shirt!

We are very pleased with the brown, what do you think?

Cockroach Feces Soft Wet

harness almost finished, newspaper articles appeared

The last few days again diligently worked on the moped, and slowly takes shape, at least the electrical system. Testing can wirs so only when the engine and everything is in there, then hopefully find no error ..
Sorry, we can go on until Monday, as we are still waiting for parts from sand-blasting, powder coaters, and online mail order: D




cable labeled by 2 up at night.



he just acts as if he has to work: D


Newspaper:


today appeared in the WAP, We like it better than expected. Thank you for it again to the newsagent, I unfortunately omitted the name.

Until then, Pascal

Bell's Palsy Tooth Infection

vorran It is ...

On Monday we finally started to fix the scope of the S50 together.
couple parts we had to get more from the local shop Simson, the parts gabs even sponsored, here, thank you again!
Thursday, we go to the wire harness, because we will probably also have some fun with, from 6V U-ignition to 12V E-ignition, but nothing that hammer out you should not:)

straight just yet Henning along with the newsagent speaking, on Saturday we are well on the cover of the WAP, so slow is serious: D

The days will finally be a "About us", in which we will introduce ourselves.

Here are the latest images from the frame:

proud as a peacock ..

test sitting

Is There Anything Comparable To Revlon Skinlights

Hennings

Today is finally Hennnigs under the S50 come from the powder coaters.
So it can now be started with the reconstruction of the moped that then hopefully by July 3, because that is going to go, ready. The parts for this are already available in most of its Garage should, therefore, still go pretty fast.
If you naturally think about the rebuilding of the S50 to date ..